Above is the Cooler Master Haf 932 Full Tower Case Black.
As you can tell there is also good fan support to keep the computer components cool.
Cases as shown below only come with the components needed to connect the motherboard and the drives.
The plastic bag you see here will have the different screws and standoffs I mentioned earlier to fasten down the motherboard.
As you can see here in the inside view even the picture looks like lots of room to work int.
This is what I consider to be one of the main reasons for choosing a full tower.
Plus lots of air flow room and as you can see the flow will be channeled over and around the computer parts.
Here you can see the top has a very large fan for driving hot air away from the computer parts keeping them much cooler that a small fan or case that has only fans mounted on the sides.
Normally I would pefere more fan from the rear of the case but this case has so many large fans all around it that I wouldn't Hesitate to buy this case for my own use.
This comes close to what I consider a perfect case.
It's nor all that expensive and it has lots of room to move around in plus lots of air movement possible to keep the inside components cool.
With this case the manufacture also includes wire ties to keep the connecting wires from interfering with the air flow as much as possible.